| Written by Mark Buzinkay
A safety assessment is a systematic procedure that aims to identify anything endangering any people involved, including workers, contractors, visitors, customers, or the general public. The risk could also result in an otherwise unwanted outcome, including bodily harm, legal or regulatory liability, or loss of property or productivity.
WHAT IS A SAFETY ASSESSMENT?
Safety assessment is a vital part of your health and safety strategy (see also: improving underground mining safety). When you execute a proper assessment, you discover hazards and risks, identify personnel at risk, and define where control measures are needed to prevent illness and injury. Eventually, this process will lead to a safety guide. Safety guides provide recommendations on how to comply with the safety requirements, indicating an internal - and sometimes industry-wide - consensus that it is necessary to take the recommended measures. They present good practices to help users strive to achieve high levels of safety through regulations.
In general, a safety or risk assessment is a thorough look at your workplace to identify situations, processes, etc., that may cause harm, particularly to people. After identification, you analyse and evaluate the safety risks, which are likely and severe. When this determination is made, you can next decide what measures should be in place to eliminate or control the harm from happening effectively. A safety assessment identifies potential damage and involves risk analysis and the likelihood of a risk.
Additionally, the overall purpose of safety assessment is to focus on providing your workers with a safe, healthy environment that diminishes potential liability issues. Since each workplace is unique, your safety team should always customise the safety assessment based on individual conditions on-site.
The best recommendation in managing safety risks is to have a regular schedule for safety assessment, e.g. a specific time each year. Sometimes they coincide with new or updated processes in the workplace, such as new legal regulations, implementation of new activities or acute hazards identified in the workplace.
WHAT IS THE SCOPE OF A SAFETY ASSESSMENT?
Depending on the situation (mentioned above), the type of safety assessment in your workplace must be relevant to the activities. Typically, this can include an overall evaluation of safety influencing factors, unsafe substances, digital and equipment risks for the company, safety risks that arise from manual handling and fire risk assessments.
Identifying the goal of this safe assessment is a necessary step to ensure that you stay on the path with the design and implementation. The goal is to try to respond to questions like:
- What can happen, and under what circumstances (see also: Safety training software)?
- What are the possible outcomes?
- How likely are the potential impacts to occur?
- Is the safety risk controlled effectively, or is further effort required?
When you plan your safety assessment, determine the scope of the evaluation and the resources needed (e.g. team members need the training to carry out the assessment), the type of risk analysis measures, involved stakeholders, all relevant external or internal regulations and standards. Often, the people involved are those impacted by the assessment outcome: directors, supervisors, representatives, risk auditors, etc.
Before performing a safety assessment, you need to define criteria for describing varying levels and types of safety risks like probability, consequences and risk levels. For instance, how are you comparing and measuring risks to prioritise the most important things to address in the workplace? Is it likely that this risk could cause harm to the business, people, or property? Think also about combined risks (multiple risks combined).
One specific aspect of safety assessment is so-called acceptable safety risks. Unfortunately, a zero-risk world is, per definition, not possible as the world is constantly changing. That's why we need to look at them. Some of them may be less impactful. We can call them acceptable as they will happen but don't have a meaningful impact on our business. Based on company objectives and culture, what is okay to accept?
Further reading: Mine Safety - Why digital management?
HOW TO CONDUCT A SAFETY ASSESSMENT?
As a safety assessment is a foundation for creating a safe, healthy workplace for employees, identifying potential hazards and risks is the first step. Then, you can design and implement systems and controls to reduce risk to safety.
First, a competent person or team should conduct safety assessments with excellent working knowledge of the studied situation, including the supervisors and workers most familiar with the operation.
You will try to identify safety hazards first:
- Look around your workplace and think about what may cause harm.
- Think about how people work, how mining safety equipment is used, what substances are involved, what safe or unsafe work practices exist and the general state of your installation/infrastructure. You should use a few different methods for identifying the hazards.
- While observation is an essential part of this process, talking to other people about their safety concerns is also important.
- Combining experience and knowledge with observation skills can effectively identify and remove these potential risks.
A systematic approach is categorising hazardous activities when you identify them:
- Physical hazards: Anything that could cause physical harm to personnel, customers, or other people. Physical issues are the most common hazards to manage in the workplace, including trips and falls, slips, noise, or vibration.
- Ergonomic hazards: How is the human body affected by work activities? Repetitious activity is one of the most common causes of ergonomic hazards. These repetitive motions are typical in office settings, factory environments, and any manual handling work.
- Biological hazards: The spread of disease can threaten the health and safety of personnel, as we experienced during the COVID-19 pandemic.
- Chemical hazards: Substances in or near the workplace could potentially cause harm to personnel. These chemical substances need to be identified and managed.
Another way to identify safety hazards is to look back at incidents in the past, as these can help you identify less obvious safety risks. Take account of non-routine operations, such as maintenance, cleaning or changes in production cycles. Additionally, some staffers have particular requirements, for example, young workers, migrant workers, new or expectant mothers and people with disabilities.
In addition to studying the recorded incidents, look at near-miss records to discover potential ways to prevent near-misses from turning into accidents. Accidents and incidents should not happen in general, so every report should have a goal of preventing these incidents from happening again in the future.
When identifying safety-related aspects of your workplace, also look into and be sure of:
-
The methods and procedures used in processing, using, handling or storing the substance, etc.
-
The people who work off-site either at home, other job sites, drivers, home office, clients, etc.
-
Non-routine activities such as maintenance, repair, or cleaning.
-
The actual and the potential exposure of workers (e.g., how many workers may be exposed, what that exposure is/will be, and how often they will be exposed).
-
The measures and procedures necessary to control such exposure through engineering controls, work practices, and hygiene practices and facilities.
-
The duration, frequency and location of the task (how long and how often a job is done).
-
The machinery, devices, materials, etc., that are used in the process and how they are used (e.g., the physical state of a chemical or lifting heavy loads for a distance).
-
Any possible interactions with other activities on the site and if the task could affect others (e.g., cleaners, visitors, etc.).
-
Any product, machine or equipment that could be intentionally or unintentionally changed.
-
The product's lifecycle, process or service.
-
The education and safety training the workers have received.
-
Any person's reaction in a particular situation (e.g., what would be the most common reaction by a person if the machine failed or malfunctioned).
-
Review all of the phases of the lifecycle.
-
Any risks to visitors or the public.
A safety risk assessment is only effective if you analyse the information correctly and then communicate with the appropriate team members to implement the changes that you need to make. Therefore, as you design your risk assessment program, you should always build an implementation plan. It comes down to three steps: analysis, evaluation, and communication.
Once safety hazards are identified, determine the likelihood of harm. Consider everyday operational situations and non-standard events such as maintenance, shutdowns, power outages, emergencies, extreme weather, etc.
Through the risk analysis process, the highest safety risks are prioritised first. Then, as solutions are implemented, you can work your way down the remainder of the list to address lower-risk concerns.
Risk analysis is where you can use a risk matrix to break down the categories of frequency and severity. This matrix creates a tool that highlights the visibility of risks, giving management information to use in decision making.
Most risk matrices have the probability or likelihood listed on the side (x-axis) and the severity or consequences listed at the top (y-axis). For example, the likelihood ratings can include a range:
-
Almost Certain
-
Likely
-
Possible
-
Unlikely
-
Rare
Then, the severity ratings might use this rating range:
-
Insignificant
-
Minor
-
Moderate
-
Major
-
Catastrophic
Monitoring and Review: The Key to Long-Term Safety Improvement
Finally, once hazards are identified, risks are assessed, and control measures implemented thereafter, the last and indeed vital stage in the process of undertaking a safety assessment is monitoring and reviewing work practices. Effective safety management does not terminate right after completing the assessment but calls for continuous vigilance to ensure that the implemented measures remain effective and that new hazards are identified as they crop up. A routine for the periodic view and update of the safety plan is established so that the standard of safety can be maintained while changes are made within the environment. This includes periodic follow-up assessments, the solicitation of employees' inputs, and staying ahead of new regulations and industry best practices. This helps to ensure that the safety assessment of a place of work is effective and to further grow with the place by inculcating a culture of continuous improvement and pro-active risk management, hence improving the workplace into a more robust and safe working premise. Scheduled periodic audits, feedback sessions, and periodic refresher training for staff can also inculcate values of safety so that safety awareness is paramount during day-to-day operations.
FAQ
What is the primary purpose of conducting a safety assessment?
Safety assessment, is mainly conducted to analyze and point out the possible risks which will pave the way for potential harm to the workforce, contractors, visitors or the public in general. This structured and systematic manner of identification of risks, its analysis of the likelihood and severity of it, and controlling of such risks will reach the conclusion of setting up a safer working environment, a decreased likelihood of accidents and injuries, and legal and regulatory compliance. Safety assessments are also an essential constituent for the prevention of probable situations of liabilities and for increasing the overall productivity of the work, as this prevents breakdowns due to incidents.
TAKEAWAY
Overall, the goal is to find and record possible hazards present in your workplace. It may help to work as a team and include both people familiar with the work area and people who are not. This way, you will have both an experienced and fresh eye for conducting the inspection. In either case, the person or team should be competent in carrying out the assessment and have good knowledge about the hazard being assessed. They will identify any situations that might occur and suggest protective measures appropriate to that hazard or risk. Eventually, they will begin implementing safety measures to eliminate the threat or control the risk using the hierarchy of risk control methods.
Delve deeper into one of our core topics: Mining Safety
Sources:
(1) https://www.resourcesregulator.nsw.gov.au/sites/default/files/documents/mdg-1014-guide-to-reviewing-risk-assessments-of-mine-equipment-and-operations.pdf
(2) https://www.worksafe.vic.gov.au/safety-assessments-mines
Note: This article was updated on the 5th of July 2024
