| Written by Michal Wozniakowski-Zehenter
Trust the Process
The process of tunneling begins with extensive planning and design. The first stage covers geological surveys, investigations of soils and rocks, and environmental impact assessments to establish the viability of a project and potential hazards. Engineers and geologists then detail maps and models of the tunnel's route, including ground stability, water table levels, and existing infrastructure.
The excavation stage follows this. There are several methods of excavation, like drill and blast, tunnel boring machines, and cut-and-cover techniques. Each method has its advantages and is selected considering the needs of a specific project. For example, only long tunnels in stable formations will mainly use TBMs, while the drill-and-blast method might be more suitable for shorter tunnels or those that pass through less stable ground.
As excavation progresses, the tunnel is reinforced against collapses and for structural integrity. This reinforcement entails installing support systems, including rock bolts, shotcrete, and steel ribs. Further, a permanent lining made of concrete or other material can be constructed to provide long-term stability and durability.
The construction phase involves continuous monitoring and quality control. Advanced technologies like sensors and remote monitoring systems trace ground movement, air quality, and structural integrity. Any anomaly or indication of instability is addressed, avoiding fatalities and project delays.
Safety in Tunneling: Challenges
These tunneling projects are fraught with technical and environmental issues to be tackled. Geology variations can change radically as one goes along the tunnel's path, entailing various excavation techniques and support systems. Unpredictable geological conditions such as faults, water-bearing strata, and gas pockets can lead to major hazards and delays.
Groundwater management is one of the major challenges in tunnels. Quite often, the tunnel misaligns with the underground water sources and flows; this may cause potential flooding, resulting in an ingress of water into the tunnel. Effective water management strategies include dewatering systems and waterproof linings so that the completed tunnel can have a dry and safe working environment.
Additional challenges urban tunnelling brings include avoiding existing infrastructure and minimising disruption of activities at ground level. It thus calls for precise planning and coordination with the local authorities and utility companies to avoid damaging underground pipelines, cables, and foundations.
Another important aspect is the environment's impact on the tunneling project. Impact on ecosystems, noise and vibration reduction, and handling waste materials are the three main factors that must be considered for the project's sustainability and environment-friendly features.
Safety in Tunneling – Hazards
Tunnelling is a hazardous operation permeated with numerous threats to human safety and health. A significant risk generated during the operation is the probability of groundfalls and cave-ins. Inherent advanced support systems, unstable ground conditions, or errors during construction can provoke catastrophic collapses and imperil the safety and health of workers, in addition to causing serious damage.
Because methane and carbon monoxide are dangerous gases in their nature, they mostly prove to be harmful by building up in the tunnel. Provisions must be put in place for proper ventilation, while the facility must detect such gases to prevent accidents and to uphold the environment as safe for work.
Fires and explosions are also very serious concerns in tunneling. In seconds, a tunnel's confined space can turn into a deathtrap in the event of a fire, with limited escape routes and a high risk of smoke inhalation. Very strict measures concerning fire safety, like the use of fire-resistant materials and regular safety drills, have to be taken to reduce this risk.
Tunneling involves the use of heavy machinery and equipment, which poses risks of accidents and injuries. Workers may be struck by moving machinery, get caught in conveyor belts, or hurt by falling debris. Such occurrences can be minimised with proper safety training, equipment maintenance, and the use of personal protective equipment.
Measures of Safety in Tunneling
Safety in tunneling is a multilevel undertaking with facets: planning, technology, training, and constant monitoring. One of the most very basic factors of safety in tunnels is related to the development of a comprehensive management plan for safety. It identifies processes for risk assessment, handling emergency responses, and safety measures specific to the project's challenges and hazards. An analysis of the potential risks is done right before construction, taking into consideration geology and water levels that vary, with several other factors affecting the surroundings. In this regard, this assessment gives a view into areas of concern and the strategies to reduce risk by reinforcing weak ground sections and an efficient water management system (see also: Safety framework mining).
Improving safety in tunnel boring is highly influenced by technological advances. Nowadays, state-of-the-art sensors and monitoring systems on modern tunnel boring machines are installed to provide real-time information on ground conditions, machine performance, and environmental factors. This allows immediate adjustment and intervention at the right time to avoid accidents, hence reducing the chances of accidents and increasing efficiency. Therefore, intense applications of remote monitoring systems are also connected with tunneling projects. The systems, controlling the parameters of ground movement, air quality, and structural integrity, continuously give data to the project managers and engineers. Any anomaly or deviations from expected conditions would automatically flag the same and would prevent accidents.
One of the most important things in tunnel boring is ventilation. Proper ventilation systems provide fresh air to the tunnel face, effortlessly removing dangerous gases and dust particles. Such circulation is done not only to ensure the good health of workers but also to minimise the risk of gas explosions and fires. Besides proper ventilation, gas detection systems are installed, monitoring hazardous gases by an alarm system that automatically adjusts ventilation if it detects dangerous levels. During any project, PPE is a must for every worker. This includes hard hats, high-visibility vests, gloves, safety glasses, respiratory protection, and other personal protective gear. This is for general protection from falling debris, machine mishaps, or the inhalation of dangerous chemicals. Different training courses are conducted to educate workers about the safety value and proper usage of PPE equipment. Daniel Fruhwirt from TU Graz said in the interview with Susanne Filzwieser: "A fire produces large quantities of flue gases. Their effect can be toxic or they inhibit oxygen uptake via the lungs. If humans are exposed to these gases for too long or in concentrations that are too high, it is impossible for them to escape. So safe, smoke-free or at least low-smoke areas are needed in the tunnel. We achieve this via so-called smoke management by means of mechanical ventilation systems."
The other critical aspect of tunneling safety concerns emergency response planning. Detailed emergency response plans spell out evacuation procedures, medical emergencies, or fire outbreaks. Such procedures are reviewed and updated to capture changed project circumstances and integrate experiences from lessons learned in past incidents. Emergency response drills are regularly held so that all workers know the procedures and can easily follow through quickly in the event of an emergency (read further: Safety training kits).
Communication is another key on the keychain to safety while working on a tunnel project. Clear and effective lines of communication shall be developed so that workers are fully aware of the potential hazards, ongoing activities, and measures put in place to ensure their protection at all times. Regular safety meetings and briefings are carried out to discuss any concerns, share updates, and, most importantly, drive home the importance of measures in place.
Another important consideration is contractor management. Most tunnel projects will have several contractors and subcontractors working on different aspects of the work. Ensuring that all the contractors follow the same safety standards and protocols is vital in maintaining a safe working environment. Knowing where all the workers are is crucial in moments when things are going wrong. Personnel management and monitoring tools are the solution. It also incorporates rigorous vetting of contractors, regular safety audits, and clear communication regarding safety expectations.
FAQ
How to maintain safety in tunneling?
Safety in tunneling must be maintained through an overall package that addresses planning, design, construction, and monitoring. Detailed geotechnical investigation is imminent to determine the ground conditions and foresee potential hazards like rockfalls, gas emissions, etc. This information enables the design of suitable support systems and the adoption of proper methods for a given geological condition of excavation.
During building processes, establishing positive ventilation systems will ensure fresh air flow and avoid settling toxic gases and dust. In this way, there is a continued check of air quality using gas detectors, establishing hazardous situations in time for intervention measures.
Workforce training and certification are paramount to ensure all individuals are knowledgeable about safety measures and can effectively respond in emergencies. Properly using personal protective equipment such as helmets, masks, and other apparel protects workers from physical injury and harmful substance exposure.
Advanced technologies, such as tunnel boring machines equipped with real-time monitoring systems, help continuously assess ground conditions and equipment performance, hence improving the working safety conditions. Safety audits and inspections are conducted regularly to ensure adherence to safety norms and thus help spot risk factors that may lead to accidents. Good interaction and open communication between all parties encourage good practices, foresee problems, and help to react to them before they arise, thus contributing to a safety culture.
TAKEAWAY
Safety in tunneling is a complex and multifaceted endeavour that requires meticulous planning, advanced technology, rigorous training, and continuous monitoring. Comprehensive safety measures can address the unique challenges and hazards of tunneling projects and create a safe working environment for all involved. As tunneling technology advances and safety protocols evolve, the goal remains the same: to complete tunneling projects efficiently and safely, protecting workers and the environment (continue reading more about tunnel construction safety).
Delve deeper into one of our core topics: Mining safety
Sources:
(1) https://www.srmeg.org.sg/docs/Construction%20safety%20in%20hard%20rock%20tunnelling%20(Handout).pdf
(2) https://www.safeworkaustralia.gov.au/safety-topic/hazards/tunnelling
(3) https://www.tugraz.at/en/tu-graz/services/news-stories/planet-research/singleview/article/ein-tunnel-ist-kein-luftkurort
Author
Michal Wozniakowski-Zehenter, Marketing Manager
Michal Wozniakowski-Zehenter is an experienced marketing and project management professional. He spent most of his career on projects with a strong focus on digital marketing and event management. He is a very active voice representing offshore and mining industries through social media channels. Michal writes mainly about offshore oil and gas, renewable energy, mining and tunnelling. Compiling and sharing the knowledge within industries is one of his goals.
Related Articles
Related Product
